| Quan |
Description |
WO part # |
Ord. Part # |
Group |
Source |
Fitting type and current
Weatherhead part number |
System |
Notes |
| 1 |
TEE, flared tube, inverted,
br, 1/4 in tube, 3/16 in tube, 1/8 in male
pipe side (flywheel housing) |
|
143481 |
103 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 pipe 3/16 tube Male
Branch Tee 602x3 |
2 |
tube size missprint?? Both
are 3/16" lines |
| 2 |
CLAMP, hose, 2 9/32ID (air
intake hose) (superseded by CLAMP
H006-0502922) |
WO-635097 |
7036575 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 2 |
CLAMP, hose, 2 9/32ID (air
intake hose) (superseded by CLAMP
H006-0502922) |
WO-635097 |
7036575 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 1 |
CLAMP, open, S, 11/16 OD
conduit, hole for 5/16 in screw (flexible hose
support) |
WO-800388 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 2 |
BOLT, MACHINE, header-pt,
hex-hd, w/spring lockwasher, S, cd or
zn-pltd, 5/16-18NC-2 x W |
|
9409098 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 2 |
BOLT, MACHINE, header-pt,
hex-hd, w/spring lockwasher, S, cd or
zn-pltd, 5/16-18NC-2 x W |
|
9409098 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 1 |
NIPPLE, pipe, S, cd or
zn-pltd, 1/8 x 1 (long) |
|
453851 |
302.1 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8" x 1" steel pipe nipple |
2 |
between Elbow 119455 and fuel
pump center section, late system |
| 1 |
ELBOW, pipe, stght, 90 deg,
br, 1/8 in (used on engines after serial
No. 74419) |
|
119455 |
302.1 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 pipe 90deg Elbow 3500x2 |
2 |
at fuel pump, listed as
brass, actual is steel |
| 1 |
PLUG, PIPE, sq-hd, CI, cd or
zn-pltd, 1/8-27NPT, RH thread (used on
engines through serial No. 74419) |
|
143932 |
302.1 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8" cast pipe plug square
head |
|
Plug used in fuel pump prior
to elbow and pressurized bellhousing |
| 2 |
CONNECTOR, flared tube,
inverted, br, 3/16 in tube, 1/8 in male pipe
end |
|
137404 |
304.1 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 pipe 3/16 tube Male
connector 202x3 |
6 |
in air filter housing |
| 2 |
CONNECTOR, flared tube,
inverted, br, 3/16 in tube, 1/8 in male pipe
end |
|
137404 |
304.1 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 pipe 3/16 tube Male
connector 202x3 |
7 |
in air filter Tee |
| 1 |
HOSE, air cleaner to oil
filler tube (1 1/4 lg) |
|
8677062 |
304.1 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
ok |
| 1 |
CLIP, closed (0.31 diam)
(bell housing pressure tube to oil pressure
sender) (used on vehicles after serial No. 53261) |
WO-807467 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
2 |
ok |
| 1 |
CLIP, closed, S, cd or
zn-pltd, 5/16, hole for 3/8 screw (distributor
ventilator line to cylinder head stud) |
WO-800794 |
7375126 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
4 |
ok |
| 1 |
NUT, jam, stamped, hex, lt,
9-notch, S, cd or zn-pltd, 7/16-20NF (used
on vehicles after serial No. 17431) |
|
107824 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
4 |
ok |
| 3 |
CLIP, open, 5/16, hole for
1/2 screw (fuel tank ventilator to dash (1);
tee to elbow (1); master cylinder (1)) |
WO-A5449 |
7047998 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
6 |
center of firewall |
| 3 |
CLIP, open, 5/16, hole for
1/2 screw (fuel tank ventilator to dash (1);
tee to elbow (1); master cylinder (1)) |
WO-A5449 |
7047998 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
7 |
center of firewall |
| 3 |
CLIP, open, 5/16, hole for
1/2 screw (fuel tank ventilator to dash (1);
tee to elbow (1); master cylinder (1)) |
WO-A5449 |
7047998 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
location???? |
| 2 |
BOLT, INTEGRAL LOCK WASHER,
int-tooth type, rd-hd, sltd, S, cd or
zn-fin, header-pt, No.10-24NC-2 x 7 1/16 |
|
420505 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
6,7 |
attaches 2 clips 7047998 to
firewall near center |
| 2 |
BOLT, INTEGRAL LOCK WASHER,
int-tooth type, rd-hd, sltd, S, cd or
zn-fin, header-pt, No.10-24NC-2 x 7 1/16 |
|
420505 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
??? Retains unknown location
clip |
| 1 |
CONNECTION, AIR TUBE,
flexible (74 in long) |
WO-800603 |
8677328 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
intake snorkel |
| 1 |
CONNECTOR, flared tube,
inverted, br, 3/16 in tube, 1/8 in male pipe end |
|
137404 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 pipe 3/16 tube Male
connector 202x3 |
4 |
rear of distributor housing |
| 1 |
CONNECTOR, flared tube,
inverted, br, 3/16in (distributor vent tube to
tee) |
WO-802665 |
7348568 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 pipe 3/16 tube Male
Connector with .040" orfice |
4 |
special .040 orfice see A1
for description of this part number |
| 1 |
CONTROL, dual, ventilation |
WO-801086 |
7375127 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
dash fording control cable |
| 1 |
NUT, hex, cd or zn-pltd,
5/8-18 |
WO-801085 |
7032607 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
retains fording control cable
to dash |
| 2 |
NUT, PLAIN, SQUARE, S, cd or
zn-pltd, No.10-24NC-2 |
|
120619 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
at ends of fording control
cable |
| 2 |
NUT, PLAIN, SQUARE, S, cd or
zn-pltd, No.10-24NC-2 |
|
120619 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
at ends of fording control
cable |
| 2 |
SCREW, MACHINE, rd-hd, S, cd
or zn-fin, No.10-24NC-2A x 1/2 |
|
120221 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
at ends of fording control
cable |
| 2 |
SCREW, MACHINE, rd-hd, S, cd
or zn-fin, No.10-24NC-2A x 1/2 |
|
120221 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
at ends of fording control
cable |
| 1 |
WASHER, lock, ext-teeth, cd
or zn-pltd, 5/8 in . |
WO-801084 |
7032605 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
retains dash fording control
cable |
| 1 |
COUPLING, hex, for 3/16 in
tube, 3/8-18NPTF male pipe end, S, cd or
zn-pltd (transfer case air vent line) |
WO-801081 |
7375128 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 x 3/8 steel pipe bushing?? |
2 |
pipe bushing in transfer
case, shown in A1 eng. Manual p149 |
| 4 |
ELBOW, flared tube, inverted,
90 deg, br, 3/16 in tube, 1/8 in male
pipe end (vent line) |
|
137420 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 tube 1/8 pipe 90deg Male
Elbow 402x3 |
4 |
front of dist. |
| 4 |
ELBOW, flared tube, inverted,
90 deg, br, 3/16 in tube, 1/8 in male
pipe end (vent line) |
|
137420 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 tube 1/8 pipe 90deg Male
Elbow 402x3 |
3 |
top of carb. |
| 4 |
ELBOW, flared tube, inverted,
90 deg, br, 3/16 in tube, 1/8 in male
pipe end (vent line) |
|
137420 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 tube 1/8 pipe 90deg Male
Elbow 402x3 |
7 |
master cyl cap |
| 4 |
ELBOW, flared tube, inverted,
90 deg, br, 3/16 in tube, 1/8 in male
pipe end (vent line) |
|
137420 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 tube 1/8 pipe 90deg Male
Elbow 402x3 |
2 |
top of transfer case |
| 2 |
ELBOW, flared tube, inverted,
stght 90 deg, br, 3/16 in (vent line (1))
(supersedes TEE 178654) (used at dash (1) on engines after serial No.
74419) |
WO-A17749 |
325200 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 brass union elbow |
7 |
master cylinder vent line at
firewall, R side. Early used dash Tee
178654 |
| 2 |
ELBOW, flared tube, inverted,
stght 90 deg, br, 3/16 in (vent line (1))
(supersedes TEE 178654) (used at dash (1) on engines after serial No.
74419) |
WO-A17749 |
325200 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 brass union elbow |
7 |
master cylinder vent line at
firewall, L side |
| 1 |
ELBOW, flared tube, inverted,
90 deg, br, 5/16 in tube, 1/8 in male
pipe end (crankcase vent body) |
|
137422 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
5/16 tube 1/8 pipe Male Elbow
402x5 |
1 |
breather fitting on side
cover |
| 1 |
ELBOW, flared tube, inverted,
90 deg, br, 5/16 in tube, 1/4 in male
pipe end (vent line to control valve) |
|
143343 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
5/16 tube 1/4 pipe Male Elbow
402x5x4 |
1 |
between fording valve and
line to side cover |
| 1 |
ELBOW, pipe, 90 deg, MI,
glvd, 1/4 pipe thd (vent control valve to
carburetor choke body nipple) |
WO-801447 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 galvanized 90deg elbow |
1 |
between manifold and pcv valve |
| 2 |
GROMMET, split, 3/16 (in dash
for dual control (1); gas tank vent tube
(1)) |
WO-800804 |
7375129 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
ok |
| 2 |
GROMMET, split, 3/16 (in dash
for dual control (1); gas tank vent tube
(1)) |
WO-800804 |
7375129 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
ok |
| 1 |
HOSE, flexible, air intake,
assy |
WO-802041 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
air filter to crossover pipe |
| 1 |
LINE, bell housing to
transfer case, assy Composed of: 2 NUT 142431;1
TUBE, S, seamless, pltd, 3/16 OD, 0.030 thkn of wall (use 22 1/2 in
TUBING 44-T-5080-10) (used on engines after serial No. 74419) |
WO-807495 |
8329638 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
2 |
tube WO-648081 used early |
| 1 |
LINE, crankcase ventilation,
assy Composed of:2 NUT 142427; 1 TUBE, S,
seamless, pltd, 5/16 OD, 0.030 thkn of wall (use 81/2 in TUBING
44-T-5080-20) |
WO-801312 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
line to side cover |
| 1 |
LINE, vacuum pump to bell
housing, assy Composed of:2 NUT 142431;1
TUBE, S, seamless, pltd, 3/16 OD, 0.030 thkn of wall (use 27% in TUBING
444T-5080-10)(used on engines after serial No. 74419) |
WO-807574 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
2 |
fuel pump end has SAE 45
flare fitting, not inverted flare |
| 5 |
LOOM, split, 3/16 x 1
(distributor ventilator tube to cylinder head
stud (1); tube clip (4)) |
WO-A17445 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
6 |
fuel vent line at firewall
clip |
| 5 |
LOOM, split, 3/16 x 1
(distributor ventilator tube to cylinder head
stud (1); tube clip (4)) |
WO-A17445 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
7 |
master cyl vent line at
firewall clip |
| 5 |
LOOM, split, 3/16 x 1
(distributor ventilator tube to cylinder head
stud (1); tube clip (4)) |
WO-A17445 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
4 |
dist vac. line at headbolt
clip |
| 5 |
LOOM, split, 3/16 x 1
(distributor ventilator tube to cylinder head
stud (1); tube clip (4)) |
WO-A17445 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
transfer case vent line clip
at oil sender |
| 5 |
LOOM, split, 3/16 x 1
(distributor ventilator tube to cylinder head
stud (1); tube clip (4)) |
WO-A17445 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
location???? |
| 2 |
NIPPLE, hose, 1/4 std taper
pipe thd, 1 in lg (crankcase vent valve
(1); vent valve hose connection (1)) |
WO-A17122 |
7047970 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 x 1 pipe nipple |
|
at oil fill vent valve |
| 2 |
NIPPLE, hose, 1/4 std taper
pipe thd, 1 in lg (crankcase vent valve
(1); vent valve hose connection (1)) |
WO-A17122 |
7047970 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
location??? |
| 1 |
NIPPLE, PIPE, S, cd or
zn-fin, style No. 2, RH, 1/4-18NPT, 3/4 in lg
(control valve to vent valve) |
|
192468 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 steel close nipple |
1 |
pcv valve to vent valve |
| 1 |
NIPPLE, PIPE, S, cd or
zn-fin, style No. 2, RH hd, 1/4-18NPT 11/4 in
(carburetor choke body to crankcase vent control valve elbow) |
|
219621 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/1 x 1-1/4 steel nipple |
1 |
intake manifold to elbow by
pcv valve |
| 1 |
NUT, INVERTED, flared tube
fitting, br, 1/4 in (fuel line) |
|
142432 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 brass tube nut 105x4 |
|
|
| 20 |
NUT, INVERTED, tube coupling,
br, pl, fin, 3/8-24NF-2 x 9/32 (fuel line) |
|
142431 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 brass Tube Nut 105x3 |
|
|
| 2 |
NUT, INVERTED, tube coupling,
pl-fin, 1/2-20NF-2 x 11/32 male thd (fuel
line) |
|
142427 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 2 |
NUT, INVERTED, tube coupling,
pl-fin, 1/2-20NF-2 x 11/32 male thd (fuel
line) |
|
142427 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
|
| 1 |
PIPE, air intake, w/vent
VALVE and BRACKET, assy. |
WO-801582 |
1375130 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
ok |
| 1 |
STRAP, carburetor stud to
control wire clip |
WO-801337 |
7375171 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
L bracket at carb for fording
cable |
| 1 |
SUPPORT, air intake flexible
hose |
WO-800387 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
air intake snorkle support |
| 1 |
SWIVEL, crankcase ventilation
valve control wire Composed of:120391
PIN, COTTER, split, S, cd-pltd, 146 x W (supersedes PIN HlOl-0137133);
137133 PIN, COTTER, split, S, pltd, 1/16 x 7/16 (superseded by PIN
HlOl-0119981); 132684 SCREW, MACH, hex-hd, S, cd or zn-fin, No. 6-32NC2
x 3/16; 120392 WASHER, FLAT, LIGHT SERIES, S, cd or zn-pltd, 1/4 in
(superseded by WASHER 120391); 120391 WASHER, FLAT, MEDIUM SERIES, S,
cd or zn-pltd, 3/16 in supersedes WASHER 120392) |
WO-A17842 |
7372554 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
one vent valve has pin
included |
| 1 |
TEE, flared tube, inverted,
br, 1/4 in tube, 1/8 in male and 1/8 in
female pipe ends |
|
A188194 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 tube 1/8 pipe Adapter Tee
(Female to Male Pipe on Run) 552x4 |
5,7 |
in air filter for brake and
wipers |
| 1 |
TEE, TUBE, br, lst, 2nd, 3rd,
ends, used w/ 3/16 in tube, 3/8-24UNF-2B
(superseded by ELBOW 325200) |
|
178654 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
3/16 Union Tee 702x3 |
|
Dash Tee - early only,
replace by an elbow 325200 for late |
| 1 |
TUBE, air cleaner to
windshield wiper hose, assy Composed of:142432 1
NUT; 1 TUBE, S, seamless, pltd, 1/4 OD, 0.030 thkns of wall (use (14
in) TUBING 44-T-5080-15) |
WO-801060 |
8673326 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
5 |
in air filter Tee |
| 1 |
TUBE, carburetor ventilator,
assy Composed of:2 142431 NUT; 1 TUBE, S,
seamless, pltd, 3/16 OD, 0.030 thkn of wall(use (13 in) TUBING
44-T-5080-10) |
WO-801586 |
8677038 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
3 |
carb to crossover pipe |
| 1 |
TUBE, gas tank vent, assy
Composed of: 2 142431 NUT; 1 WO-802247 LOOM,
5/16 ID x 45 in lg; 1 TUBE, S, seamless, pltd, 3/1 OD, 0.030 thkn of
wall (use (86 in) TUBING 44-T-5080-10) |
WO-800701 |
8676982 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
6 |
fuel tank vent line |
| 1 |
TUBE, IGNITOR VENT, assy.
Composed of:2 142431 NUT; 1 TUBE, cop,
seamless, pltd, 3/16 OD, 0.030 thkn of wall (use (9 in) TUBING
44-T-5080-10) |
WO-800374 |
8676980 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
4 |
dist vent to air crossover
pipe |
| 1 |
TUBE, IGNITOR VENT TO WIPER,
assy. Composed of:2 142431 NUT; 1 TUBE,
cop, seamless, pltd, 3/16 OD, 0.030 thkn of wall (use (27 in) TUBING
44-T-5080-10) |
WO-800375 |
8676981 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
4 |
dist vent vac.side from
special fitting |
| 1 |
TUBE, master cylinder to
elbow, assy. Composed of:2 142431 NUT; 1 TUBE,
S, seamless, pltd, 3/16 OD, 0.030 thkns of wall (use (30 in) TUBING
44-T-5080-10) |
WO-801271 |
8673503 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
7 |
ok |
| 1 |
TUBE, S, 0.0299 x 2.188/2.122
OD x 2% in Ig (rain deflector to flexible
hose) |
WO-802042 |
|
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
connector intake snorkle to
rain cap |
| 1 |
TUBE, transmission case vent
to tee, assy. Composed of:2 142431 NUT;1
TUBE, S, seamless, pltd, 3/16 OD, 0.030 thkn of wall (use (25 in)
TUBING 44-T-5080-10) |
WO-648081 |
8673483 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
2 |
early design goes transfer
case to dash tee. Replace by WO-807495 |
| 1 |
TUBE, VENT, assy. Composed
of:2 142431 NUT;1 TUBE, S, seamless, pltd,
3/16 OD, 0.030 thkn of wall (use (12 in) TUBING 44-T-5080-10) |
WO-801077 |
8673324 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
7 |
brake vent line between air
filter and dash elbow (Tee), determined by
length |
| 1 |
TUBE, VENT, assy. Composed
of:2 142431 NUT;1 TUBE, S, seamless, pltd,
3/16 OD, 0.030 thkns of wall (use (18 in) TUBING 44-T-5080-10) |
WO-A12935 |
8677028 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
7 |
center firewall brake vent
line, determined by length |
| 1 |
VALVE, control, ventilation,
assy (supersedes VALVE G740-7375172)
(superseded by VALVE G740-7410836) |
WO-A17840 |
8393083 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
superceded |
| 1 |
VALVE, control, ventilation,
w/PIN, assy (superseded by VALVE 8393083) |
WO-648083 |
7375172 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
superceded |
| 1 |
VALVE, control, ventilation
w/PIN, assy (supersedes VALVE 8393083) |
WO-804277 |
7410836 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
air crossover pipe valve fig
03-3 |
| 1 |
VALVE, control, ventilation
w/o PIN (superseded by VALVE G742-7372752) |
|
7372553 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
|
superceded |
| 1 |
VALVE, control, ventilation,
w/o PIN (supersedes VALVE G740-7372553) |
WO-804276 |
7372752 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
valve near intake, fig 01-12 |
| 1 |
VALVE, ventilator, assy. |
WO-A6895 |
5336400 |
304.5 |
M38 Parts ORD 9 SNL-G740 1955 |
|
1 |
PCV valve |
| 1 |
CONNECTOR, ball check, 3/16
tube (fuel pump) |
WO-800347 |
7375063 |
304.5 |
M38A1 Parts ORD 9 SNL-G758
1956 |
3/16 tube 1/8 pipe Male Ball
Check Connector, Fairview Fittings #43-3A
|
2 |
special fitting at fuel pump
for bellhousing vent line |
| 1 |
ELBOW, flared tube, inverted,
90 deg, br, 1/4 tube, 1/8 male pipe end
(fuel pump) (vacuum section) |
|
137421 |
306 |
M38A1 Parts ORD 9 SNL-G758
1956 |
|
4,5 |
inside fitting vac. Pump to
line |
| 2 |
CONNECTOR, flared tube,
inverted, br, 1/4 in tube, 1/8 in male pipe end
(tee to fuel line (1); vacuum tube to manifold tee (1)) |
|
137405 |
306 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 tube 1/8 pipe Male
Connector 202x4 |
4,5 |
between manifold vacuum tee
and line to vacuum pump |
| 2 |
CONNECTOR, flared tube,
inverted, br, 1/4 in tube, 1/8 in male pipe end
(tee to fuel line (1); vacuum tube to manifold tee (1)) |
|
137405 |
306 |
M38 Parts ORD 9 SNL-G740 1955 |
1/4 tube 1/8 pipe Male
Connector 202x4 |
4,5 |
in vaccum pump, wiper tube
connection (outside) |
| 1 |
TEE, pipe, S, cd or zn-pltd,
1/8-27 (to intake manifold) |
|
444147 |
306 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8" Street Tee 3750x2 |
4,5 |
intake manifold vacuum Tee,
actual brass not steel |
| 1 |
PLUG, PIPE, sq-hd, MI,
zn-ctd, 1/8-27NPT (supersedes PLUG 113175) |
|
219188 |
306 |
M38 Parts ORD 9 SNL-G740 1955 |
1/8 square head iron pipe plug |
4.5 |
intake manifold vacuum Tee
extra port plug |
| 1 |
TUBE, intake manifold to
vacuum pump, assy. Composed of: 2 142432 NUT;
1 TUBE, S, seamless, pltd, 1/4 OD, 0.030 thkns of wall (dev lgh 22 in)
(use TUBING, 44-T-5080-15) |
WO-800869 |
8673331 |
2202 |
M38 Parts ORD 9 SNL-G740 1955 |
|
5 |
ok |
| 1 |
TUBE, WINDSHIELD WIPER,
vacuum pump to tee, assy. Composed of: 2 143432
NUT; 1 TUBE, S, seamless, pltd, 1/4 OD, 0.030 thkns of wall (dev lgh
161/2 in) (use TUBING, 44-T-5080-15) |
WO-800870 |
8673330 |
2202 |
M38 Parts ORD 9 SNL-G740 1955 |
|
5 |
ok |
| 1 |
TEE, flared tube, inverted,
1/4 tube, 1/8 female pipe side (distributor
vent tube) |
|
178910 |
2202 |
M38A1 Parts ORD 9 SNL-G758
1956 |
1/4 tube 1/8 pipe Female
Branch Tee 652x4 |
5 |
Wiper vacuum Tee L/Rear eng. |
| 1 |
LINE, tee to windshield
wiper, assy. Composed of: 1 142432 NUT; 1
44-T-5080-15 TUBE (3 3/8 in.) |
WO-807845 |
8332076 |
2202 |
M38A1 Parts ORD 9 SNL-G758
1956 |
|
5 |
in vacuum tee, rubber hose
connects here |